Egyptian industries

STAND BOX FAN ELDAHABIA
WITH REMOTE CONTROL ( 16 INCH)
TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours

Air flow: 360 ْ
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

Box Fan with remote control
TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 120 minutes

Air flow: 360 ْ
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

STAND BOX FAN ELDAHABIA
WITH REMOTE CONTROL ( 16 INCH)

TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

Box fan without remote control
TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 120 minutes
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

CEILING FAN ( 56 INCH)
TECHNICAL SPECIFICATIONS:
-56 inches ceiling fan

- 3 blades fro sheet metal

- electronstatic panting

- hanging pipe length: 26 cm.

-On/ off, speed switch.

- Control speed switch 5 speeds

- voltage: 220 V

-Frequency

-Power consumption: 75 Watts

Wall Fan (18 Inch)

TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

Vacuum cleaner
TECHNICAL SPECIFICATIONS:

- Heavy Duty Vacuum Cleaner
- Dust-full indication
- Metal Pipe
- Foot Pedal Switch
- Suction power control
- Essential Feature Plastic Body
- Dust bag 5L
- Cable Length 5M

Two way home hood home
TECHNICAL SPECIFICATIONS:
with atensioner switch for suction and ejection
with afrille all components of the aspirator are high
grade plastic naterials (A.B.S+p.p)
- Suction rod plastice (AB.S), 6 wings < 25 cm
- Wall mounting hole dimensions 30 x 30 cm
- Itis possoble to install without shaving as the body
of the straw is made of hard material
Voltage : 220-240 Volt
frequency: 50 Hz
Power :40 +5 W

5 Burner stove
Technical skills:
-5 burners stove with self-ignition
- Enamel surface stainless steel.
- Economic gas rate consumption
- Surface from stainless steel 304 to resist corrosion & Rust
- Knobs from bakelite for heat resistace
- Burners from aluminum alloy for heat resistance
- Dimensions : 55 x 75 cm

4 Burner stove
Technical skills:
-4 burners stove with self-ignition
- Enamel surface stainless steel.
- Economic gas rate consumption
- Surface from stainless steel 304 to resist corrosion & Rust
- Knobs from bakelite for heat resistace
- Burners from aluminum alloy for heat resistance
- Dimensions : 55 x 55 cm

Gas cooker 3 burner
TECHNICAL SPECIFICATIONS :-
- 3 Burners & Oven
- Body paint with enamel
= Economic gas rate consumption
- Knobs from bakelite for heat
resistace
- Burners from aluminum alloy for
heat resistance
- Dimensions : 58 x 45 x 80 cm
- Weight : 40 kg

GAS COOKER 4 BURNERS
TECHNICAL SPECIFICATIONS :-
- 4 Burners
- Electrostatic-paint body/stainless
- Surface from stainless steel 304 to
resist corrosion & rust
- Self ignition
- Knobs from bakelite for heat resistace
- Knob for Oven / grill . prevent
open grill with oven in the same for safety
-Temperd glass for the oven door
- Burners from aluminum alloy for heat resistance
- Upper cover from temperd glass and strong hinges

- ACESSORIES :-
( Automatic Gril - Self Ignition - Timer - Interior Lightting )
- Bottom compartment to maintain the food warm .
- Oven capacity : 55 liters
- Dimensions : 52x55x85 cm
- weight: 40kgs

Gas cooker four burners

technical specification

- 4 Burner & Oven
- Enamel surface stainless steel.
- Heat glass for the oven door
- Surface from stainless steel 304 to resist corrosion & rust
- Knobs from bakelite for heat resistace
-Temperd glass for the oven door
- Burners from aluminum alloy for heat resistance
- Cover and strong hinges
- Oven capacity: 55 Litres
- Dimensions: 52x55x85 cm

Gas cooker 4 burners

technical specification

Gas cooker burners
TECHNICAL SPECIFICATIONS :-
- 5 Burners
- Electrostatic-paint body/stainless
- Surface from stainless steel 304 to
resist corrosion & rust
- Knobs from bakelite for heat resistace
- Knob for Oven / grill . prevent open grill with oven in the same time for safety .
-Temperd glass for the oven door
- Burners from aluminum alloy for
heat resistance
- Upper cover from temperd glass and
ECE TES
- ACESSORIES :-
(2 Automatic Gril - Self Ignition — Timer - Interior Lightting )
- Bottom compartment to maintain the food warm
- Oven capacity : 80 liters
- Dimensions : 75x55x85 cm
- Weight : 45 kgs

GAS COOKER 4 BURNERS LUXE
TECHNICAL SPECIFICATIONS :-
- 4 burners
- stainless steel
- Cup Burners
- Gas oven + Gas grill turn spit.
- 1 Tray + 1 Grid.
- Thermal top and oven glass.
- turbo fan
- Ignite surface
- Iron Grids ( painted)
- Oven light
- Adjustable legs
- Dimensions : 60x60x85 cm

Gas Cooker 5 Burners Golden
TECHNICAL SPECIFICATIONS :-
- Stainless steel
- Cup Burners
- Gas oven + Gas grill turnspit.
-1 Tray + 1 Grid
- Thermal top and oven glass.
- Turbo Fan.
- Reflecting glass
- Ignite surface
- Iron Grids (painted).
- Oven light
- Adjustable legs
- Dimensions 60x90x85 cm

Gas cooker 5 burners

TECHNICAL SPECIFICATIONS :-
- 5 - Burners
- Stainless Steel
- Cup Burners
- 1 Tray + 1 Grid.
- Thermal top and oven glass.
- Turbo Fan.
- Ignite surface
- Iron Grids ( painted)
- Oven light
- Adjustable legs
- Dimensions : 60x90x85 cm

Gas heat water 9s- 5L
TECHNICAL SPECIFICATIONS :
- Operate with natural gas & LPG gas
- Works with low water pressure
- Heat exchanger from free oxygen copper, harmful emissions (Eco-friendly)
- Self-ignition
- Electrostatic paint is full the outside
cover is an anti-rust treatment
- Automatic gas cut off
- Upon extinguished flame
- Economic gas rate consumption
- Dimension: 48 X 28 X 18 cm

Gas cooker 5 burners lagrange
TECHNICAL SPECIFICATIONS :-
- 5 Burners
- ( Stainless steel) frame.
- Knob for oven and grill
- Full ignition
- cups burners.
- Thermal double oven glass.
- Thermal cover glass
- Digital Timer.
- Turbo Fan.
- Cast pan support
- Oven light
- Adjustable legs
- Dimensions (60x90x85 cm)

Gas water heater KEMET 10 L
TECHNICAL SPECIFICATIONS :-
- Flow rate 10 L/ min.
- Operates with natural gas and LPG gas
- Heat exchanger from free oxygen copper,free of harmful emissions (Eco- friendly)
- Automatic gas closed after 22 minutes of continuous operation
-Equipped with knob to control on water flow rate
- Equipped with knob to control on burners gas
- Equipped with sensor to automatically gas closed at the water temperature reaches 80 C*
- Equipped with a digital temperature display and light lamp during operating
- Automatic start once the water is opened
- Battery-powered and equipped with a free outside adaptor.
- Electrostatic paint for the outside coverisan antirust treatment.
- Gas-saving
- Dimensions : 48x28x18 cm

Gas heat water
TECHNICAL SPECIFICATIONS :-
- Flow rate 6 L / min.
- Operates with natural gas and LPG gas
- Heat exchanger from free oxygen copper, free
lead and free of harmful emissions (Eco- friendly)
- Automatic gas closed after 22 minutes of continuous operation
child tampering
- Equipped with knob to control on water flow rate
- Equipped with knob to close half of burners
in summer to save gas consumption.
- Equipped with knob to control on burners gas
- Equipped with sensor to automatically gas
closed at the water temperature reaches 80 C
- Equipped with a digital temperature display
- Automatic start once the water is opened, works with at the lowest water pressure
- Battery-powered and equipped with a free
eras
- Electrostatic paint for the outside cover is an
antirust treatment
- Dimension: 44.5 x 30 x 11 cm

GAS HEATER WATER
MODEL: S8-10L
TECHNICAL SPECIFICATIONS :-
- Flow rate 10 L/ min.
- Operate with natural gas & LPG gas
- Work with low water pressure
- Heat exchanger from free oxygen copper, harmful emissions
- Self-ignition
- Electrostatic paint is full the outside cover is an anti-rust treatment.
- Automatic gas cut off Upon extinguished flame
- Economic gas rate consumption
- Dimension: 70x35x20 cm

Gas heater s8 - 10 L upgraded
TECHNICAL SPECIFICATIONS :-
- Flow rate 10 L / min.
- Functions by natural gas & butane
- Works with low water pressure
- Automatic closure when the torch is extinguished
- Protection against increased water pressure due to a safety valve
SERPENTINE:
Oxygen-free copper plated with a protective layer
- Resistant to eating
- High heating efficiency
- Economic gas rate consumption
Dimension: 55x32x20 cm

Water Gas heater heat pro 10 L
TECHNICAL SPECIFICATIONS :-
- Operates with natural gas and LPG gas
- Heat exchanger from free oxygen copper, free lead and free of harmful emissions (Eco- friendly)
- Equipped with knob to control on water flow rate
- Equipped with knob to close half of burners in summer to save gas consumption.
- Equipped with knob to control on burners gas
- Equipped with sensor to automatically gas
closed at the water temperature reaches 80 C*
- Equipped with a digital temperature display and light lamp
- Automatic start once the water is opened
works with at the lowest water pressure
- Battery-powered and equipped with a free outside adaptor.
- Electrostatic paint for the outside cover is an antirust treatment
- Gas - saving
- Dimension: 59 x 34 x 18 cm

GAS HEATER WATER
HEAT PRO DECOR 10 L
TECHNICAL SPECIFICATIONS :-
- The heaters front i coverd with thermnal glass
- Flow rate 10 L/ min.
- Operates with natural gas and LPG gas.
- Heat exchanger from free oxygen copper, free
lead and free of harmful emissions (Eco- frienclly)
- Automatic gas closed after 22 minutes of continuous operation
- Equipped with a safety key to lock against
- Equipped with knob to control on water flow rate
- Equipped with knob to close half of burners
- Equipped with knob to control on burners gas
closed at the water temperature reaches 80 C
- Equipped with a digital temperature display and light lamp
- Automaticstart once the water is opened
works with at the lowest water pressure
- Electrostatic paint for the outside cover is an antirust treatment
-Gas-saving
Dimension + 59x34%18 cm

WASHING MACHINE
BANDA 4.5 KG
TECHNICAL SPECIFICATIONS :-
- Washing motor capacity 80 W
COMPONENT :
- Bacteria-resistant plastic
- Moving hand for easy carrying
- All types of cleaning detergent are used
- The motor works in two directions
- Two fan speed control modes
- Suitable size for easy storage
- Dimensions : 41 x 34 x 62 cm

WASHING MACHINE
BANDA 3.5 KG
TECHNICAL SPECIFICATIONS :-
- Washing motor capacity 80 W
COMPONENT :
- Bacteria-resistant plastic
- Moving hand for easy carrying
- All types of cleaning detergent are used
- The motor works in two directions
- Two fan speed control modes
- Suitable size for easy storage
- Dimensions : 41 x 34 x 62 cm

HALF AUTOMATICE
WASHING MACHINE
ROODY 10 KG
TECHNICAL SPECIFICATIONS :-
- washing motor capacity 170 W
- drying motor capacity 70 W
- Bacteria-resistant plastic
- Double basin with separate
- Innovative fan for cleaner laundry
- All types of cleaning detergent are used
- Elegant modern design
- Dual water entrance to save on time and water
- Dimensions: 82 x 47 x 88 cm

HALF AUTOMATICE
WASHING MACHINE
JOODY 6.5 KG
TECHNICAL SPECIFICATIONS :-
- Washing motor capacity 120 W
- Drying motor capacity 45 W
COMPONENT :
- Bacteria-resistant plastic ingredients
- Fan designed to prevent wrinkles
- All types of cleaning detergent are used
- Elegant modern design
- Dual water entrance to save time and water
- Dimensions: 74 x 42 x 83 cm

TOP LOADING
WASHING MACHINE 10 KG
TECHNICAL SPECIFICATIONS :-
- Top loading
- Automatic
- Stainless steel drum anti rust
- 10 kg capacity
- Energy class A
- Transparent top cover
- Intelligent control with LED indicator
- Water entry system 3D
- Anti-foaming sensors
- Filters for impurity purification
- Troubleshooting alarm
- Water level selection
- Power-off memorization
- Spin speed 730 rpm
- Dimensi (57x59%x97) cm

WASHING MACHINE
EL FARFOSHA 10 KG
TECHNICAL SPECIFICATIONS :-
- washing motor capacity 170 W
COMPONENT :
- Bacteria-resistant plastic ingredients
- All types of cleaning detergent are used
- Smaller external size for easy storage
- Large interior space
- Elegant modern design

FRONT LOADING WASHING MACHINE 7 KG
TECHNICAL SPECIFICATIONS :-
- Front loading
- Fully automatic
- Stainless steel drum anti rust
- Energy class A
- Intelligent control with LED indicator
- 15 min quick wash
- Not affected by power cut
- Suspended damping balance
- Anti-vibration system
- Child lock
- Spin speed 1200 rpm
- Dimensions: (85x46x60) cm

HALF AUTOMATICE WASHING MACHINE GALAXY 14 KG
TECHNICAL SPECIFICATIONS :-
- Washing motor capacity 185 W
COMPONENT :
- Bacteria-resistant plastic
- Double basin with separate
motor per basin
- Innovative fan for cleaner laundry
- The possibility of changing the
exchange from the right or left .
- All types of deaning detergent are used
- Elegant modern design
- Dual water entrance to
save time and water
- Dimensions: 82 x 47 x 88 cm

DEEP FREEZ 7 DRAWERS
NO - FROST
TECHNICAL SPECIFICATIONS :-
- 7 Drawers Digital screen to control and indicate faults
- capacity 230 liters
- Transparent drawers and an extra shelf for chocolate
- Advantage of working at lower voltage 220V
- Eco-friendly - Low noise
- Reversible door - Anti-bacterial
- Keeps the cooling and fan stop at opening the door
- Coils of compressor from copper
- Multi Air Flow System
- Freeze temperature up to -18 C*
- super freeze
- VCM layer anti-rust
- The highest efficiency and lowest electricity consumption
- Dimensions: 172 x 59 x 53 cm

DEEP FREEZ 5 DRAWERS
NO - FROST
TECHNICAL SPECIFICATIONS :-
- 5 Drawers Digital screen to control and indicate faults
- capacity 155 liters
- Transparent inserts
- Advantage of working at lower voltage 220 volts
- Eco-friendly - Low noise
- Reversible door - Anti-bacterial
- Keeps the cooling and fan stop at opening the door
- Coils of compressor from copper
- Multi Air Flow System
- Freeze temperature up to -18 C*
- Super freeze
-VCM layer anti-rust
- The highest efficiency and lowest electricity consumption
- Dimensions : 145x57x55 cm

DE-FROST FRIDGE
TECHNICAL SPECIFICATIONS :-
- One door 176 L
- Internal freezer, separate door
- Glass shelves
- Rack for Door
- Vegetable Drawer
- Low noise
- Eco-friendly
- Dimensions: 134x54x52 cm

MINI BAR FRIDGE
TECHNICAL SPECIFICATIONS :-
- Silver Color
- Operates with Freon R600 A Eco-friendly
- VCM layer anit rust
- The door is injected with foam insulation material to maintain the cooling degree, which maintains motor efficiency and reduce electricity consumption
- Low noise
- Anti-breakage thermal glass Shelves
- Interior door for freezer
- Ice drawer under freezer
- Drawer for vegetables and fruits
- Dimensions: 84 x 48 x 45 cm

WATER DISPENSE FRIDGE
NO-FROST

TECHNICAL SPECIFICATIONS :-
- Capacity 500L with water Dispenser
- Large inner space
- Eco-friendly
- Low noise
- High efficiency and electricity Provision
- Unbreakable tempered glass of shelves
- Keep fresh foods
- Multi Air Flow System
- Full cooling insulation for the cabinet
and doors to save cooling in case of power outage
- Dimensions (182x78x84) cm

NO-FROST FRIDGE
TECHNICAL SPECIFICATIONS :-
- Available in sizes: 320, 410, 500L
- Large inner space
- Low noise
- Provision for electricity consumption
- Glass shelves
- Anti-bacterial
- Keep fresh foods
- Multiple air flow
- The entire refrigerator door is injected with foam to maintain the cooling level, reducing electricity consumption and maintaining motor efficiency
- Dimensions 320 L (163x55x59) cm
- Dimensions 410 L (171x68x60) cm
- Dimensions 500 L (182x78x84) cm

SIDE BY SIDE FRIDGE NO-FROST
TECHNICAL SPECIFICATIONS :-
-Netinternal capacity 518 liters
- The equivalent capacity is 570 liters,
-Ecodriendly -Low noise
- shelves for the freezer
- Digital screen for temperature electronic contro
- Full LED interior lighting
- Large space in doors compartment
- Super Freeze Function
- Antibacterial components
- Full cooling insulation for the cabinet and doors to save coolingiin case
of power outage for 6 hours
- Right side fridge and left side freezer
-VCM layer anti-rust
- A distinctive aesthetic look
- Coils of compressor from copper
- Dimensions (178x64x91) cm

DIGITAL FRIDGE NO-FROST
TECHNICAL SPECIFICATIONS :-
- Available capacity: 410L & 500L
- Large inner space
- LED lighting
- Eco-friendly
- Low noise
- High efficiency and electricity
Provision
- Glass shelves
- Anti-bacterial
- Keep fresh foods
- Multiple air flow
- Full cooling insulation for the cabinet and doors to save cooling in case of power outage
- Dimensions 410 L (171x68x60) cm
- Dimensions 500 L (182x78x84) cm

AIR CONDITIONER DIGITAL INVETER
TECHNICAL SPECIFICATIONS :-
- Capacity : 1.5, 2.25,3 H (Inverter)
- LED Display
- Automatic air distribution in four directions
- Filters against bacteria, dust and moisture
- Automatic cleaning Mode
- Turbo Mode
- Low Noise (less 35db)
- Anti-rust outdoor unit operates with R410a Eco-friendly
- Assembly and disassembly enable
- Timer 24 hours
- Not affected by power cut
- all components from copper (evaporator, condenser, valves)
- Tropical compressor operating at temperatures up to 52 degrees produced by Japan's GMCC

FRENCH DOOR FRIDGE NO-FROST
TECHNICAL SPECIFICATIONS :-
- Net internal capacity 536 liters
- Eco-friendly
- Low noise
- Unbreakable Tempered glass of shelves
- Freezer drawers from Thermal material
- Temperature electronic control
- Antibacterial components
- Large space in doors compartment
- Effective air distribution in all directions
-Super Freeze Function -Water Dispenser
-Full cooling insulation for the cabinet and doors to save cooling in case of power outage
-The top part fridge and the bottom part freezer
-VCM layer anti-rust
- A distinctive aestheticlook
- Coils of compressor from copper BLANCA CLT
-Dimensions 176 x 76.5 x 91 cm

LED TV

-back light D-LED

-Resolution FHD (1080x1920)

-Aspect ratio 16:9

-Brightness 275-400 cd/m2

Contrast Ratio 3000-4000: 1

Led lamp WLED

Led Lamp Life Time At least 50000 H

refresh rate 60Hz

viewing angle 178

uniformity Ok

response time 6-10 ms

atv PLA / SECAM /NTSC

RF INPUT 1

AV 1

YPBPR 1

VGA 1

AUDIO FOR VGA 1

HDMI 2

DIGITAL AUDIO OUTPUT 1

USB2.0 2

Air conditioner DIGITAL PLASMA
TECHNICAL SPECIFICATIONS :-
- Capacity: 1.5, 2.25,3H
- Automatic air distribution in four direction
- Filters against bacteria, dust and moisture
- Automatic cleaning Mode
- Turbo Mode
- Low Noise (less 35db)
- Anti-rust outdoor unit operates with R410a Eco-friendly
- Assembly and disassembly enable
- Timer 24 hours
- Not affected by power cut (evaporator, condenser, valves)
- Tropical compressor operating at temperatures up to 52 degrees produced by Japan's GMCC

LED LAMP 9W BULB DAY LIGHT / WARM

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

LED LAMP 6W CANDLE DAY LIGHT

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 25000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

LED LAMP 5W BULB DAY LIGHT / WARM

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

LED LAMP 12W BULB DAY LIGHT / WARM

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

LED LAMP 18 W T8 tube 120CM aluminum Day light

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

LED LAMP 9W BULB DAY LIGHT / WARM

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

TABLEWARE
TECHNICAL SPECIFICATIONS :
~The H.E.| Company produces the tableware from
stainless steel with the nice form under the license
of Holand Amefa Company. These forms are
assembled as asets insicle boxes with different
sizes according to thecustomers need,
- These sets are made from the brilliant stainless
steel, whichkeeps ts brilliance for long years.
- The company produces many models
and types and also other types, such as Swedish
model and types 105,145, 165,175,185, 195,
220, 230,240, 1015, 1017, 1038, 1041, 1051,
1090, 1091 with the nice flow
105-145- 165-175 - 185-195
Family 200
220-230-240
family 1000
1015-1017 - 1038 1041 - 1051- 1061- 1090-1091

LED LAMP 18w t8 tube 120cm plastic day light

input voltage 85-265v AC 50/60Hz

color temperature 6400 k

color rendering index >=80

life span >= 30000 Hours

operating temperature -5:+55 c

humidity 10%:90%

power factor >=0.9

luminous flux efficacy >= 90 lumen/watt

viewing angle 220

body material aluminum covered by plastic

starting time <=0.5 sec

international protection IP44

base size E27

warrany 3 years

cover milky plastic

heatsink 2mm thickness, aluminum

led pcb thickness >= mm

led type 2835mm

KITCHEN WARE
TECHNICAL SPECIFICATIONS :
-H.E| Company produces all modern kitchen needs,
which are made from stainless steel. Researches have
proved that the stainless steel is the only material,
are not harm for health.
WE OFFER TO THE CUSTOMER:
- COOKING POTS IN EIGHT SIZES
(160,180,200, 220, 240, 260, 280,320 mm) and
every size has three different heights to suit any family
~The size of pots between the range from litres to
9.5 litres, the side handles and the cover knobs are
made from stainless steel or bakelite, which has no
effects with temperature even at 280c.
forms, which can be used on table too.
CHIP PANS AND CASSEROLES GROUP:
- It has different sizes with or without cover and with double bottom.
- It is made from stainless steel 18/10.
- The sizes range from 1 litre to 3 litres.
Frying pans Group with diameters 200 mm,240 mm, 280 mm and chip pans to fry all
kind of meats in the shortest time saving the fuel.

PLATES & TRAYS GROUP
TECHNICAL SPECIFICATIONS :
There are different groups from plates and trays for
modern house which have made from stainless steel
to protect food from being polluted.
These products can be used in hotels, restaurants and camps . These variety group contain round plates, or
oval plates with different sizes for all uses Also there are butter, bread, cheese, meat, vegetable plates,
rectangular and round cake plates, six divisions and four division trays.

GRANITE COCKWARE
- Excellent non-stick coating both inside and outside
- Pure Aluminum coated with granite
- Extremely scratch resistant and durable
- Easy to clean
- Manufactured with high quality Aluminum using die casting method
- PFOA Free

HOUSEHOLD COOKWARE
Alllead-free pure aluminum household
cookware products According to
Egyptian Standard M.QAR 1235 - 1996(S
HOUSEHOLD COOKWARE
- (Super and Shawrma) 4,8,12
- Tea trays size 37- 34 cm Set.
- Kazan 60 - 35 cm Set.
- piece baking sheet 30 - 24cm Set with cover and without cover.
- Tea pot 3 piece.
- Milk pot 3 piece.
- 3 piece Fry Pan set with cover and without cover.
- Rectangular 3 piece trays.
- Steamer Pot.

GAS REGULATORS
- which are working with gas mixture of 60% Butane & 40% Propane.
- Nom. outlet pressure : 30 cm water
- Max. discharge : 1000 lit/h.
- Min. discharge : 5 lit/h.
- Inlet pressure : 0.32 - 10 bar.
- Surrounding medium temp.: -20 to 50C
- entrapment pressure : 40 cm, water
- Min . out let pressure 25cm , water
- Max. out let pressure 37cm , water.

GAS CYLINDERS
- Sizes 30 & 60 liter which can be
filled by gas mixture (60% Butane, 40% Propane).
- Outer dlameter : 301 mm.
- Hydraulic test : 30 Kg/cm2
- Burst test : 75 kg/em2

Agricultural fertilizer 20-20-20

CHARACTERISTICS :
- Fully water soluble solid from fertilizer
containing ( N.P.K).
- It is completely free of chlorine ,
sodium and heavy metals .
- it contains the three major elements (
Nitrogen , Phosphor , potassium ) and
add directly into soil .
- Suitable for any kinds of crops and for
most irrigation systems .
General recommendatiois for application rates :
- Soil application :
3-12kg \ acre depending on the type and
age of the crop .

Agricultural fertilizer 19-19-19
CHARACTERISTICS :
- Fully water soluble solid from fertilizer containing (N.P.K)
- It is completely free of chlorine , sodiur and heavy metals .
- it contains the three major elements (Nitrogen , Phosphor , potassium) and add directly into soil .
- Suitable for any kinds of crops and for
most irrigation systems .
General recommendeatiois for application rates
-soil application:
3-12 kg \ acre depending on the type and
age of the crop .

Agricultural fertilizer 9-0-40

Agricultural fertilizer 5-5-45

SPEED DRILL
TYPE SDA18
TECHNICAL SPECIFICATIONS
pee 3 meter
PTET 240 cm
Distance between lines 10-15 cm
No. of opener lines 21
TANK CAPACITY 250kg
LEE Pe pA
Wheel dimension 2 Wheel (15x700)
Distance between Water Line 120 cm
Chasises Channel
Transmission Gears and chains

PLOUGH ( HEAVY DUTY )
(7-9-11) KNIVES
TECHNICAL SPECIFICATIONS
Is common used in agriculture field due to its operational efficiency and ease of use and maintenance .
TOTAL WIDTH 400 cm for 11 knives
TOTAL LENGTH 300 cm for 9 knives
Plough depth 200 em for 7 knives
Tractor compactably 96cm
Equipment weight Variable up to 50 cm
Knife Plow
-To 120 hp (in elven knives)
-To 90 hp (in nine knives )
- 1000 Kg (in elven knives)
-850 Kg (in nine knives)
-700 Kg (in seven knives)
Friction resistance

AGRICULTURE TRACTORS
Agriculture heavy duty tractors
power from 30up to 210 hp.
2 or 4 wheel drive
USES AND APPLICATIONS :
Agriculture and industrial purposes , construction,reconstruction and traction.

DRY RESIDUES CHOPPER
TYPE HBRH
TECHNICAL SPECIFICATIONS:
No. of knives 9
Main spindle Steel 45 x dia 65
capacity 1.5 ton/h
motor 3PH-30KW-1500r.p.m
Shaper dim. ~~ 770x2018x1500 mm
size 3000x3155x3000 mm

Pump sets manufacture & assemble helwan diesel engines by helwan or deutz diesel engines discharges from 30 to 400 m’hr- pressure from 1.5 to 7 bar.USES AND APPLICATIONS:- The units are used to pump fuel and means for industrial or agricultural purposes ( sprinkler or drip irrigation systems )- Units are installed fixed on chassis or mobile, high pressure water pumps to extinguish fires and modern irrigation systems- Water pressure units used for fire extinguishing systems Manufacture, production and assembly of Helwan- Diesel Engines Company. Helwan diesel engines give a discharge of up to 120 m’h - pressure up to 7 bar

SPRAYER CAPACITY (300-600 - 1000) LITER

Technical specifications:

Pump 3 piston Discharge 30:50 Lit /M

Motor benzene

power 5:13 HP

Mixing Mechanical / hydraulicTank Galvanized sheet / fiber glassChassis angles

HAZARD WASTE INCINERATORS
GENERAL SPECIFICATIONS
-The only incinerator in Egypt that approved by EEAA, it is equipped with fule gases treatment unit.
- Operated with solar or natural gas.
-Temperature and fuel consumption are controlled automatically.
- Produced in different capacities, From 30 to 100 kg/hr (other capacities are available according to customer demands
TECHNICAL SPECIFICATIONS
- Combustion temperature : 1200 c
-Body temp : 60 c
-Power supply : 220 / 380 v
- Electricity consumption : 5 kw/hr
-Fuel consumption : 25 - 30 L/H

CHARCOAL KILN
GENERAL SPECIFICATIONS
- Charcoal kiln is manufactured for producing charcoal from wood by indirect heating in the absence of oxygen
- The kiln is made of steel cylindrical chamber isolated with thermal bricks, rochwool
- The kiln is manufactured according to the Egyptian Standard No.Es : 6122 / 2008 .
Environmental Affairs agency .
TECHNICAL SPECIFICATIONS
- Model 1: MASS/000/3000_195 _ 0018
Capacity : 3 Ton dry wood
Productivity : 1 Ton dry charcoal/cycle
Cycle time : 6 Hr
Dimensions : 3.5x2.75x2.95 m
- Model 2: MASS/000/3000_195 _ 0018
Dimensions : 4.5x3.2x2.95 m

SEWER SWEEPING TRAILER
TECHNICAL SPECIFICATIONS:
Capacity: 5 ton
No . Of spring : 4Leaf spring
Axles : 2 Axis square 80 x 80 mm
tank: capacity 4 m3 provided
with 2 partitions - 2 upper holes
- 1 lower hole
Hoses carrier : one hose on 2 sides
SUCTION PUMP :
Gearbox equipped with a filter to prevent solid bodies to reach to the pump
Pump : powered by PT.O
Paint : trailer painted with 2 layers against rust and acids the outer surface with two convenient color

TRAILER 4 & 6 TON
( ORDINARY & TIPPER)
TECHNICAL SPECIFICATIONS
BOX DIMENSIONS
Length xWidthx Height : 4x2x0.5m
Wheel base : 265 cm
Height from ground : 115-134 cm
Weight of trailer: 2.5 ton
Payload : 6 ton
Box capacity : 4m3
Axles : steel sec 80 x 80 mm
Suspension : front and rear on
4 leaf spring
Brakes : hydraulic or mechanical

R.O DESALINATION PLANTS
CAPACITY: 100m3/day up 10000m3/day
SYSTEM OF TREATMENT:
The company design , installs &onstructs R.O
Desalination plants plants of Sea water
according to its own design up to 45000 ppm.
MAIN COMPONENTS :-
- Cartidge filters 5 microns
- Primary treatment of wells
- Units of pretreatment chemicals
-R.O MEMBRANES
- Cleaning system for R.O membranes
- Disinfection ( PH value correction)
TECHNICAL SPECIFICATIONS :-
- Electrical power (installed) kw
- Operation period ee
- Required area m2
- ADVANTAGES :-
- Easy for operation and maintenance.
- Small area required for the plant .
- Easily of transportation and reinstallation.

COMPACT PLANTS FOR
SURFACE WATER TREATMENT
from 2000m3/day up 38000m3/day
SYSTEM OF TREATMENT:
surface water treatment process depends on removal of impurities and coagulation the filtration and disinfection is according to the specifications
MAIN COMPONENTS
- Intake , Mixing Coagulation , flocculation container
-FILTERS
-STORAGE TANK
-HYDRO CONTAINER
(Taker , Intermediate , Filters, Network ) Pumps
- Chlorination Dosing system
- Electrical control panels
TECHNICAL SPECIFICATIONS:-
Electrical power (installed) :100kw
Operation period : 20 h/day
~Requirec! area : 600 m2 wy.

SEWAGE WATER
TREATMENT PLANT ( RBC)
CAPACITY: 500 m3/clay up 35000 m3/day
SYSTEM OF TREATMENT:
The company designs installs and constructs
sewage water treatment plants.( Rotary biological contactors RBC)
WATER SPECIFICATION BEFORE
AND AFTER TREATMENT:
T&S : before 500mg/L - after 50mg/L
BOD : before 500mg/L - after 60mg/L
COD : before 700mg/L - after 80mg/L according to specifications of WHO
MAIN COMPONENTS:
- pretreatment equipments :
- mechanical and manual screen system
- Biological stage :
- Aeration . Biological treatment basin
- Clorifier / Setting basin - Sludge thicken basin
- Instrumentation and control unit
TECHNICAL SPECIFICATIONS :-
- Electrical power (installed) :180 kw.
- Operation period : 20 hr/day
required area: 420:m2. 4

SURFACE WATER TREATMENT
WITH DIRECT FILTRATION
CAPACITY : 30 -60- 90L/sec
SYSTEM OF TREATMENT:
Direct filtration water treatment depends on removal of impurities and coagulation then filtration and disinfection by addition of chlorine to
transform it to potable water according to specifications of (W.H.0)
MAIN COMPONENTS
- open sand filter Bug
- underground tank
- Filtration building NO (3)
- Administration building
- Diesel building 220 K.V.A
- Pump and chemical dosing building
TECHNICAL SPECIFICATIONS :-
1-PUMPS
- aw water pumps: 50 L/S
Filtration water pumps : 90 L/S
- Intake wash pumps for ground tank
2- FILTRATION WASHER
- Blowers : 25 m3/min
- Reverse wash pumps : 200 L/S
- Chemicals building dosing pumps NO (2) iS

surface water treatment
BY DYNAMIC SAND FILTRATION SYSTEM
capacity: 60/90 L/sec
Dynamic Filtration act on removal of Bacteria alga and
turbidity for producing clear potable water according to the standard of WHO
MAIN SYSTEM PROCESS:
The dynamic sand filtration depend on dynamic co-current pass of turbid water mixed with alum from down holes of filters and direct to distributors under sand bed two meter thickness and pass through sand bed towards above clear water product has been chlorinated before pumping to the network of town.
MAIN COMPONENTS :
-Dynamic sand filter
- Air compressors
Electric control panels:
- Clear water storage tank 500m3
- Generator unit 160 KVA
-Required power 0.74 KVA/ M3 / HR
-Area: 0.45m2/m3 produced water
- Produced wateris according to the standard of (W. H. 0)

SEWAGE WATER TREATMENT
PLANT ( ACTIVATED SLUDGE )
CAPACITY : 500m3/day
SYSTEM OF TREATMENT:
The company designs installs and constructs sewage water treatment plants.
These plants perform the following processes:
- Removal the heavy and small wastes and sand.
- Aeration of organic components disinfection
- The produced water is according to the
international specification and can be used for irrigation purpose
MAIN COMPONENTS:
- pumps for sewage water
- pumps for chemicals dosing.
- pumps for treated water
- blowers for aeration . ~ mechanical screening
- sand removal tank - rapid mixing tank
- primary settling tank - aeration tank
- final settling tank - chlorination tank
- electrical control panels.
TECHNICAL SPECIFICATIONS :-
- Electrical power (installed) : 180 kw
- Operation period: 20 hr/day
- Reciuired area 4201m2 wy

UNDERGROUND WATER
TREATMENT PLANTS
CAPACITY: 25, 60, 90, 150, 200, 450 L/sec
SYSTEM OF TREATMENT:
The company installs and constructs water
treatment plants according to its own design:
- PH value correction
-Removal of manganese and iron by
sedimentation and filteration and sterilization
MAIN COMPONENTS :-
- Aeration tower [Bollyetheline]
- Blower
-Sandfilters -Pumps
- Chemical dosing units
TECHNICAL SPECIFICATIONS :-
Electrical power 300kw
- Electrical power [operating] 200kw
ADVANTAGES :-
~The produced water is according to the
standard specifications of WHO]
Design has the ability to stand high loads
-Easy of maintenance , operation and installation

SEWAGE WATER TREATMENT
PLANT [BIOWORK]
CAPACITY: 35000 M3 / day
SYSTEM OF TREATMENT:
This system of biological treatment depends on
biological aeration with diffuser in treatment tanks
to distribute air into tanks and using the activated
sludge after that in treatment tanks then
settlement tanks .
The request area for this system depends on the combination of the different treatment processes as aeration, sedimentation and disinfection into case so it needs small area.
MAIN COMPONENTS :-
1- Pretreatment equipments 2- Biological treatment
- Mechanical screen
- Grit, sand removal unit
- Sludge concentration tank
3 Chlorination equipments: - Chlorine contact tank
WATER SPECIFICITIES BEFORE AND AFTER
TREATMENT :
B.O.D
Before : 500 mg/L- after : 60 mg/L
C.O.D
Before : 600 mg/L - after : 80 mg/L
S.S
Before : 21000 kg/dlay - after : 50 mg/L

STAND BOX FAN ELDAHABIA
WITH REMOTE CONTROL ( 16 INCH)
TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

UNDERGROUND WATER
TREATMENT PLANTS
CAPACITY: 2000m3/day up 1000m3/day
SYSTEM OF TREATMENT:
The company installs constructs water treatment
plants according to its own design. Treatment is done
by disinfection ph value correction and removal of
Manganese and Iron the filtration and disinfection is
according to the standard of (W.O.H) .
MAIN COMPONENTS :-
- Oxidative Tower (Concrete )
- Chemical dosing units
- Sandfitter - Pumps
- Electrical control panels
- Standby generator
TECHNICAL SPECIFICATIONS :-
- Electrical power (installed ) : 80 - 200 kw
- Operation period :20 hr/day
- Required area : 600 m2

GRAY IRON CASTINGS
MAIN PRODUCTS:-
- Vehicle and tractor parts Water pump parts
- valve parts diesel engine parts
- electric Elevator parts
- Parts of equipment and workshop machines

WEAR AND HEAT
RESISTANT CASTINGS:
- High chromium cast iron and
- Mills plates from high chromium and manganese steel.
- Other wear and heat resistant castings.
ALLOYING ELEMENT:
For Raw Material Mills According to Mechanical
specification Mentioned Below
plates 7-12 % Cr
Plate and Hammer 11-14% Mn
Mills and Breakers
Wear and heat Resistant Castings Ni/ Cr Coolers and furnaces of cement industry
MECHANICAL SPECIFICATIONS :-
- Hardness Up to 67 HRC
- Wear Rate :- 40 gm/ cement ton.

STEEL CASTINGS
MAIN PRODUCTS:
- Spare parts for railway wagons
- Digging tips
- High pressure valves
- Spare parts for sugar co.
CHEMICAL ANALYSIS

DUCTILE IRON ROLLS CASTINGS
HIF produces all kinds of rolls from high quality alloy ductile iron .
Our products have the same quality as imported ones, with various sizes & weights up to 3 tons for machined roll.

PRECISION CASTING
MAIN PRODUCTS :
- Spinning and weaving machine spare parts
- Sewing machine parts
- Optics and precision instruments spare parts
- Cement plant spare parts
- Spare parts for transportation and transportation
CHEMICAL SPECIFICATIONS

CYLINDER LINERS CASTINGS
MAIN PRODUCTS :
- Dry and wet Liners for diesel and gasoline engines
CYLINDER LINERS
- Dry and wet cylinder liners
50:200 mm diameter
- height: up to 400 mm for all types of vechicles

CASTINGS
Forging products can be produced
according to customer orders and international standard specifications.
PRODUCTS CASTINGS :
- Bushes, Studs from 20mm.
- Blanks for gears and fans.
-White alloys which are Used in bearings
- Antimony lead alloys
TYPES OF CASTING:
Sand Casting - Mold - Gravity - Pressure Die Casting.
USES:
Bearings industry - Typography
- Some parts of the vehicle - Spare parts.

DUCTILE IRON CASTINGS
MAIN PRODUCTS :
- Castings For cars,trucks, and tractors
Rolls
SPECIFICATIONS
Following grades are made According International Standard Specifications

STEEL INGOTS
FIELD OF APPLICATION :
Production of bars & plates by Free forging.
GRADES :
carbon \ alloy steel ingots
SPECIFICATION :
weight:
4.5:10 Ton
Length :
1.5:2 m
Diameters :
400 mm : 1000 mm

COPPER CASTINGS
Products of copper and it's alloys,
aluminum and it's alloys
Welding electrodes - decoration
items - some parts of cars - Spare
parts Industry — Khan Al Khalili
Products Condenser Tubes — Qualine
PRODUCTS :
- Rods of diameter from 10 mm up to 50mm.
- Wires of diameter from 2mm up to 12mm (rolls & lengths).
- Welding wires from copper alloys.
- Profiles - different shapes.
- Pipes thickness from 0.5mm up to 10 mm

HOT ROLLED PLATES
FIELD OF APPLICATION:
in Engineering industries Constructions
acc. to type of steel
steel grades:
- Shipbuilding Steel
- Pressure Vessels Steel
- Carbon Steel - Pipe Steel
- Construction Steel
SPECIFICATIONS ( DIMENSIONS)
- Thickness : 6 -100mm
- Width : 1000 - 3000 mm
- Length : up to 30M
- Heat treatment and U/S-3 Test can be
done for produced Plates acc. to customer request
- M.TC. is issued including chemical
Composition & mech. properties and delivered acc. to customer request
- We issue Lloyds'certificates for ship building steel

BILLETS
FIELD OF APPLICATION :
production of rebar
GRADES :
Carbon Steel
specification
Square cross-section:
- 100mm x 100 mm
- 130mm x 130 mm
- Lengthsupto 6m

STEEL ROLLS
FIELD OF APPLICATION :
In engineering industries
GRADES :
carbon / alloy steel
( heat treatment) .
SPECIFICATION :
- Weights: 1-8 Ton
-Lengths:1-6m
- Diameters: 200 - 450 mm

COLD ROLLED COILS
FIELD OF APPLICATION:
In engineering industries
GRADES :
Cold rolled coils It can be slitted
SPECIFICATIONS:
- Coil thickness : 0.5 : 3, 0 mm.
- Coil Width : 1000 : 1550 mm.
- Coil inner diameter : 508 : 610 mm.
- Maximum Coil weight : 20 tons
- Coils can be siltted into strips or plates ( minimum strip width 100 mm ) (plate length 1: 4m)
- Annealing and oiling process can be Made acc. To customer request.

ROLLING
Any hot or cold alloy can be rolled and produced in accordance with customer.
orders and in accordance with international standard specifications
ROLLING PRODUCT :
-0.5 to 6 mm thick and 300 mm wide
Disks for copper — 1000 mm for AL.
- Strips of 2 mm to 0.15 mm Thick and
from 11mm to 200 mm wide.
- Aluminum and it's alloys rolls from 0.5
mm to 6 mm in weight up to 1.5 tons.
- Aluminum Rounds from 0.5 mm to 6 mm ;
thick and from 14 cm to 95 cm diameter.
- Pure aluminum Rolls and Sheets .

HOT FORGING
Forging products can be produced
according to customer orders and
international standard specifications.
FORGING PRODUCTS
- Brass forging products.
- Aluminum alloys hot forging products.
-Min — weight of products 20 g.
- Max- weight of products 1.6 kg
USAGE :
Cookers supplies — Heaters — chlorine bluff
some spare parts for machines

BUSHES AND BEARING
SHELLS
Bush and bearing are manufactured
with high efficiency from a mixture
of metals and alloys in specific
proportions to withstand operating
efficiency in all the difficult conditions of the various types of engines.
USES AND APPLICATIONS :
Used inside the motor gasoline, diesel
and various machines
TYPES OF BEARING ALLOYS :
- Red alloy composed of copper and lead
electrically coated with allayer of tin
and lead .
- White alloy of tin and aluminum and
packaging are the segments of the
special steel.

BOLTS & NUTS
Bolts and nuts formed by cold and hot forming with different lengths and diameters (inch&mm) cold forming from 3:24 mm diameter, hot forming from 20:50 mm diameter. according to Egyptian and international standard
Types:
- Rail fastenings.
- Hexagonal & Square Bolts.
-Wood & Self Tapping Metal Screws.
- Machining Screws (slotted & crosshead).
- Rivets & Upholstery Nails with different shapes and colors.
- Bolts & Nuts for Railways.
- Special Bolts according to demands.
- Spring Washers with different diameters.

AUTO PARTS
PISTON , CYLINDER LINERS PIN
PISTON RINGS
14001/2015 and 45001/2018 and It's Laboratories are
accredited by the national accreditations council (EJAC).
SPARE PARTS AND ELECTRIC GENERATORS :
Pistons, cylinder liners, Pins, Piston rings.
- Diesel 909/916/912
ENGINEERING EQUIPMENTS
-Rorman Tractor 108/109mm
TECHNICAL SPECIFICATIONS:
H.E | Company produces the following Auto Perts Pistons,
finder liners, Pins, Piston ings within range from 50 to 175
mm diameter for Petrol and Diesel engines.
1- Pistons are made of aluminum-siicon alloy (12%, 18%).
2- Cylinder ners are Produced Dry, Wet and Finned type, they
are made of high quality grey cast ron and Spheroidal cast iron according to the German standerd (DIN).
3- Piston Pins are of high quality low carbon steel (15 cr3),heat treated, supper finishecl and high acracy to get the
bestpropertes for strength and fatigue to suit allappikationsPre
4- Piston Rings are made of special high quality castiron for
all types compression, wedege, taper face, ol scraper and
tings and oil control rings These Rings are made according
PIE

STEEL WHEELS
In the field of feeder parts for automotive Industry.
H.EI. Company produces all types of steel wheels
for passenger cars, Tractors and Light trucks of
sizes from 13 to 20 inch
TECHNICAL SPECIFICATIONS:
Types of steel wheels are already produced.
- Rim size: 5.5x 15 inch
- Rim size : 5.5 x14 inch
- Agricultural Tractor rim size: 4.5x20 inch
- Rim size :13x5 inch
- Rim size : 16x5 inch

SODIUM CHLORATE
Its white or yellow crystals , Sodium chlorate is used in the production of chlorine dioxide which is used in the manufacture of paper and purification of water of all kinds , as well as in laboratories and the production of chlorates of other metals, especially potassium of which cannot be prepared by electrolysis, as well as perchlorate salts and chlorite salt , in the manufacture of dyes, inks and the electronics industry

PROTECTIVE GEAR CLOTHING
TECHNICAL SPECIFICATIONS:
- Two pieces Drill - Avarolls one piece
- drill, gloves - teel dick water proof.
- Apron from sky scrap imitation leather / waxed apron leather tanned with chrome ( covering and protecting the body from heat - volatile parts of liquid chemicals and acidic liquid ).
- Chrometanned leather gloves (cover and protect the skin from heat - volatile parts of liquid chemicals an acidic liquid).
- Leg andarm protector with chrome tanned shell leather
- Natural leather shoes with a solid toe anti ( oil- acid- chemical-and anti slip )
- Natural leather shoes without solid toe protect the feet from being run over by sharp objects.

GELATINE DYNAMITE
HIGH VELOCITY
This type of dynamite is designed to be used in very hard rocks and all types of blasting
(surface, underground , quarries , seismic, prospecting)
- Cartridges of Pareffined Kraft paper with dimensions 32 x 400 mm
- Cartridges of poly ethylene film with
dimension 50 x 400 mm, 65 x 400 mm
DetonationValocity : Min. 5000 m/s
Hammer test : Min. 0.5 kg/m
Sensitivity : Min. 6 cm

GELATINE DYNAMITE
AZC produces the main types of dynamite according to customer requirements based on usage in terms of weather conditions, environment, nature of rocks, diameters used, humidity, explosion above the surface of the earth or bombing under water with the highest safety precautions required, our assistance and advice
PACKING :
- Cartridges of Pareffined Kraft paper
with dimensions 32 x 400 mm
- Cartridges of poly ethylene film with
dimension 50 x400 mm , 65 x400 mm
- The outer packing is telescopic carton
boxes with net weight 25 kg
TECHNICAL SPECIFICATION :-
Density: 1.4 £ 0.05 gm/cm3
Detonation Velocity: Min. 2000 m/s
Hammer test : Min. 0.5 kg/m
Sensitivity: Min . 6 cm

CARTRIDGED EMULSION
EXPLOSIVE

BULK EMULSION EXPLOSIVE
FEATURES OF BULK EMULSION :
- Bulck emulsion is more safe during
handling and transportation.
- Can be used in (underground ,open pit, underwater)
- Low emission of hazzard gases especially nitrogen dioxide
- Shortening the charging time in the grooves by using the cart in a short time
- Can be discharged in different diameters
- Usage of several compositions sutible for any kind of rocks .
CHARACTERISTICS :

N.C. DAMPED WITH ISO
PROPYL ALCOHOL

This form of N.C. is produced by replacing
Ee

according to the clints request.

GRANULATED N.C.
This is produced form N.C. fibrous using
new technology developed and implemented by our experts
This type is characterized by excellent
solubility and safe handling . it can be produced with different nitrogen contents and viscosities according to client requirements

COMBUSTIBLE TABLETS
SPECIFICATIONS:
Tablet is made of pure hexamine powder mixed with 5% paraffin wax.
- Weight of tablets 100r 20 g.
- calorific value 1 kilo cal/1g min
-Itis stable, can be stored under any conditions.
Completely burned with slight ash content.
USES:
- With piljrimas going to mecca .
- In chemical laboratories to facilitate chemical Pre
- With army in war fields.
- Plastic boxes each of capacity (5) tablets.
- For easy use of the combustible tablets small stoves made of galvanized steel constructed which is small and portable.

Anfo blasting agent
- Highly safety in transportation and use because it doesn’t contain hazard material.
- Low price compared with other industrial explosives.
-VOD approximately 2500-3000 m/sinside holes .
- Used by pouring directly itno the holes with gelatinous deynamite as a poster.
- No harmful gasses during explosion specially
- Suitable for all kinds of quarries, all diameters
PACKAGING
-20 kg lined pp. Bags Storage terms
STORAGE :
- Stored in dry and well ventilated place be low 35C

safety fuse

DETONATING CORD

TORCH BATTERY
1.5 VOLT
SPECIFICATION :
- Metal Jacket
- Conforming to the egyption
standard specification

VEHICLES BATTERIES
LONG LIFE
BATTERY SPECIFICATIONS :
- Manufactured according to the latest European Technology
- Batteries feature the best intercell welding technology to decrease energy loss
- Designed for heavy duty loads
- Use the highest quality of lead alloys to decrease corrosion of plates
- Eco- Friendly battery
- Superior ability to motor start
in all weathers
- Maintenance free and low Maintenance batteries
ADVANTAGES :
- 12 months warranty from date of use
- Golden Horse Batteries suitable for all Kinds of vehicles and all types of motors
- The company provides After sales Service all over the Countery.

HEXAMINE
SPECIFICATIONS:
- Density : 1.33 gr/cm3.
- Bulk Density : 0.7-0.8 kg/L
- PH value : approx 8
- Feomaldehyde cotent : 0.02 %
- Sulphate content: 0.001 %
- Insoluble material content :0.02% max
- Cholride content : 0.00015% max
- Grain size : according to requirement
from 0.3-0.5 m.m
uses:
as anti caking agent for fertilizers E.G. urea prills and granules by a rate of 2.5 - 3.9 kg
- In manufacturing smokeless solid fuel.
- In medicine industry.
- As a hardening agent for phenol resins.
PACKAGE:
In polyethylene bag 50 kg.

SODIUM NITRATE (NANO3)
- Density : 2.257+0.1 g/cm3.
- Decomposition point : 380 C°.
- Soluble in ammonium but not soluble in
- Oxidizing agent for glass
and crystal industry
- Tobacco indusrty.
As a hardening agent for phenol resins. in industries
- As anti cacking agent for fertilizers .

UREA FORMALDHYDE
SPECIFICATIONS:
- Urea content: 23£2%
- Total Formaldehyde content :57 £ 2%
- Water content: 20 2%
- PHvalue: 6.5:7.5
- Viscosity at 25C : from 130: 180 c.p
- Density: 1.28:1.31 g/cm3
-Apperance : Clear & free from impurity
- Formic Acid content: 0.05 % (max)
(At client recjuest)
- Anti-Caking for fertilizers special for urea fertilizer.
- Industrial at glue production 65%,

FORMALDHYDE
SPECIFICATIONS:
- Clear colourless liquid without impurities
- Density at 20°C: 1.11+0.02 g/cm3
- Formaldehyde content : 37+1%
- Methanol content : 8 % (Max).
- formic acid content : 0.03 % (MAX)
USES:
- Textile industry
- plastic industry
- Hexamine industry
- petroleum field
PACKAGE:
- plastic containers 36 litres capacity .
- Galvanized barrels 200 litres capacity .
- customers Aluminum or St .v tanks .

HELIOTHAN VARNISH
Poly urethane varnish for wood and
wooden furniture, with high glossy film
APPLICATION :
- Colorless coating, multipurpose for wooden floor and wooden furniture after treatment with suitable sealer
- Curing: 2-3 hrs; at 25 °c
- The surface must be free from oils, completely dry,

STORAGE AND VALIDITY :
- 6 months in its original cans at the
proper storage conditions at 25 °C.
PACKAGE :
-1kg Can Gallon 4 kg.
GENERAL NOTES
It is produced according to E.S. No. 1122

HELIO MATT
- High Quality compound coat with no gloss gives after dryness hard surfaces and with good resistance for weathering conditions.
Matt synthetic alkyd paint for interior uses free from colophony
USES:
- Used on masonry painted wood and metal surfaces.
- Used after painting with suitable primer.
Thinning with suitable thinner.
SPECIFICATIONS :
- Viscosity: not less than 100 seconds at 25°c with Ford cup No.4.
- Finesse: less than 50 microns.
- Hiding power : according to the type of surface more than 4m2/ kg.
STORAGE AND VALIDITY
- 12 months in its original cans in proper storage conditions.
- It is produced according to E.S.No.1757
-1 Kg can - 5 Kg gallon - 25 kg vessel

ALIMINUM PASTES , LEAFING
HELIOPASTE 1065 L
APPLICATIONS:
- Heat resistant paints . - Printing inks
- Industrial paints - Plastics
- Anti corrosive paints - Light concrete
TECHNICAL SPECIFICATION:
- Solvent : white spirit
- Residue on sieve 45 Micron
(325msh): 5% Max.
- Average particle size: 6-7 Micron
- Loafing value : 65 - 70%
- Water coverage : 20000 cm2/gm
FOR SPECIAL ORDERS :
- Available with leafing value: 78%
- available with particle Size: 5 Micron STORAGE & STABILITY
- Shelf life at least one year in its original
- Vessel 15 kg.

ALIMINUM POWDER
TECHNICAL SPECIFICATION:
- Finnessity 25 micron & humidity 1% (max)
USES:
- In paint manufacturing
- For ships and rail way wagons painting
- In steel drums or barrels each
- capacity 20 kg
- capacity 40 kg

MARINE PAINT
HELIO POX PC 300 UC
Two component special high build phenol
epoxy undercoat film, with remarkable
resistance to chemicals, solvents and sea
water. Exceptionol durability with
methanol and EDC. Excellent
anti-abrasion and impact resistance
properties. Compatible with other HEIIO
POX PC 300 products.

ANTI CORROSION PAINT
HELIOSIST HBS:
DESCRIPTION:
To be used as a multipurpose epoxy paint under
and above water surface ship's hull, balance
tanks and industrial steel structures surfaces.
APPLICATION METHOD:
Airless spraying is preferred. paint’s brush or roll
can be used for limited areas and welding areas.

MARINE PAINT
HELIOPOX VC
SPECIFICATIONS :
- Two pack vinyl modified epoxy infemediats «,
primer without max, over coating inlervals
- Solids Volume: About 52%
- Recommended DFT/ WFT: 80/155 microns
100/190 microns
- Theoretical Coverage: 6.50 mi /Liter
5.24 nf /Liter (as stated solid volume and OFT/ WFT)
- Specific Gravity: About 1.30 g/cm
Pot ife 8 hours-at 20%

primer M P
CODE NO, / COLOR:
EPBD No. according to color
DESCRIPTION :
two- pack high- build epoxy primer with
excellent anticorrosive performace.
Multipurpose primer for all epoxy- systems in
marine and industry with practically no
overcoating interval. An epoxy sealer coat for
application to freshly applied zinc primers to
prevent the formation of zinc salts and to facilitate subsqent overcoating.

ANTI FOULING PAINT
HELIOMAR AF 100
DESCRIPTION:
LONG LASTING ANTIFOULING PAINT FREE
OF TIN, based on chlorinated rubber with a
maximum content of copperos oxide, fast
dryina with an excellant antifouling properties.

snatoline paint
High gloss synthetic alkyd paint for interior and
exterior uses free from colophony. Gives after
good resistance for weathering conditions.
USES:
wood and metal surfaces.
- painted directly or after primer coating
- Thinning with suitable thinner.
SPECIFICATIONS :
- Viscosity : not less than 100 seconds
- Finess: less than 40 microns.
- Hiding power: according to the type of
STORAGE AND VALIDITY
- 12 months in its original cans. At the proper
- Itis produced according to E.S. No. 793

NITROLINE PAINT
Fast drying paint composed of high quality resin
together with the best quality alkyd resins and
natural oils and additives according to Egyptian
and international standards.
The paint is characterized by its resistivity to
petroleum substances and weathering conditions.
USES:
To be used on metallic surfaces after applying suitable under coating and repainting cars by using spray gun only .
Itis produced in different colors according to customer request

HELIO PLASTIC
- Helioplesticis a matte emulsion paint. antirub, nor
yellowing, alkali and synthetic detergents resistant
- An excellent surface gives washable film
USES:
- Can bs used for painting old and resent
walls porous or concrete. It is used as
undercoat for wall paper.
- Old building of non porous surface which he
been painted before must be washed with
with helioplastic after thinning .or painted
with super helioplastic after thinning .
DRYING :
from 30 min to 4 hours complete drying
STORAGE AND VALIDITY
- 12 months in its original cans at the normal
conditions at 25° and 65% relative humidity
itis produced according to E. S . NO. 1539

SANTOLINE PRIMER
white - red - yellow
Composed of high quality Alkyd resin,
pigments and fillers used as primary
coating for metals to Protect them from
weathering Conditions effects.

STAND BOX FAN ELDAHABIA
WITH REMOTE CONTROL ( 16 INCH)

TECHNICAL SPECIFICATIONS:
- Deluxe box fan 16 inch with rotary front gaurd -With stand & remote control
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

FLATOLIN VARNISH
- Varnish composed of high quality
Alkyd Resin, natural oils and
characterized with high gloss and used
for interior and exterior painting.
USES:
- Top coat varnish for wooden and metal
surfaces to give high gross and protection .

STAND BOX FAN ELDAHABIA
WITH REMOTE CONTROL ( 16 INCH)
TECHNICAL SPECIFICATIONS:
NETROLINESH VARNISH
-fast dry varnish
- It is based on NC solution of high quality synthetic resins, organic solvent and other additives.
uses:
As a varnish for Wood & metal materials
FILM PROPERTIES :
- Drying Time :
a) touch dry in 10 min
b) Complete dry in 2 hrs.
- Flexibility : more than 4 mm By Erexon devicea
-3 Speeds + On/Off, pushbutton switch.

Timer 7.5 hours
Voltage: 220-240 V
frequency: 50Hz
-Power consumption: 70+5 Watts
-Double vertical oscillation.
-Speed: 1250 r.p.m

SALLERLEN VARNISH
- Fast dry varnish, good filer for woods porposity &
easy to be smoothed with sand paper.
- Composed of high quality NC., Alkyd resins,
natural oils and other additives.
USES:
It is uses as wooden undercoat to obtain a
smooth surface suitable for high gloss top
coat varnish .

INDUSTRIAL PAINT
HELIOROAD
(HOT APPLIED ROAD MARKING )
It is Composed of high quality resins, pigments and other additives.
- Has very good road adhesion
- Resistant to weathering .
- Resistant to petroleum materials.
- Has good luminance and suitable for hot areas.
- Used for marking roads at hot
temperature (180 : 200 °C ) and softing

INDUSTRIAL PAINT
ROADSTAL
(HOT APPLIED ROAD MARKING )
- Composed of high quality resins, natural
oils, pigments and other additives.
DRYING :
- Touch Dryness : 30. min
- Complete Dryness : 1 Hour
STORAGE AND VALIDITY :
- 6 months in its original
cans at the proper storage
conditions .

SHOTGUN POWDER
AZC produces shotgun powder for
the various calibers as flakes .

SHOES POLISH
USE:
for shining shoes and leather products
TYPES : Liquid Shoe polish
DESCRIPTION : produced from purified types of waxes and solvents
Polish, protect and give the leather more

SULFONIC MAASARA
Al-Maasara Company for Engineering
Industries established a sulfonic acid
month as a first stage, due to the Egyptian
market's need for a product that conforms to.
environment, production is made from 100%
local raw materials in cooperation with Middle
Whats sulfonic acid and why is it important?
- It is the raw material used for the manufacture
of industrial detergents, including:
fine dry particles ( washing powder )
liquid like
- All-purpose liquid industrial detergents
- Traditional and automatic washing machines
- Textile Auxiliary Material

THE OBESTY & EDIBLE OIL
The company produces edible oils
with good quality ( mixed oil ,
sunflower oil , palm oil fun) .

JUNIOR LATHE
TYPE 1623

UNIVERSAL LATHE
TYPE 1628

CRANK SHAPER
TYPE 735

MILLING MACHINE TYPEG682

VERTICAL DRILL
TYPE 2135

MILLING DRILL
TYPE M.D.H.32

HYDRAULIC HACK SAW
TYPE H.S.H. 250

BENCH DRILL
(ONE BASE AND TWO BASES )
TYPE 2112/16/20

METAL PRESS
TYPE M.P.H 60

ECCENTRIC PRESS
TYPEE.P. 2.5

WOOD HORIZONTAL
MORTISING MACHINE
TYPE MH 20

PAPER AND CLOTH PRESS

THICKNESSING MACHINE
TYPE TH 630

WOOD TENONING M/C
TYPE TEH 120

SURFACE PLANNER MACHINE
TYPE PH 500

WOOD SAW
TYPE H8

WOOD MOULDING MACHINE
TYPE FGH 260

WOOD COPYING TURNING MACHINE
TYPE WTH20

CIRCULAR SAW
TYPE CSH 260

MULTI-FUNCTION CARPENTRY
MACHINE (5 OPERATIONS )
TYPE MPH410

STAND GRINDING MACHINE
TYPE 3-150 & 3-200 & 3-250

LEATHER CUTTING PRESS
type LPH 25

WOOD BAND SAW
TYPE B.S.H8

PLASTIC CRUSHING
MACHINE TYPE PCH 5

plasma cutting machine

tanning barrel

DIESEL ENGINES

BOARDS OPERATE & CONTROL
AIR COOLED

WATER JET MACHINE
TYPE 1100

PUMP FIRE
FIGHTING SYSTEM

GENERATOR WITH
SOUND PROOF

UNITS OF WELDING ARC
(400 - 500 A)

SINGLE PHASE FRACTIONAL
MOTORS 1/3 HP

BOARDS OPERATE & CONTROL
WATER COOLED

Rotary oven

THREE PHASE
ELECTRIC MOTORS

SEMI-AUTOMATIC PRODUCTION LINE
OF ARABIC BREAD (MAWY)

AUTOMATIC ARABIC BREAD
(MAWY)

MOBILE SEMI-AUTOMATIC BAKERY
(MOUNTED ON TRAILER)

FULL AUTOMATIC BREAD
PRODUCTION LINE

TOKTOK OVEN

SEMI-AUTOMATIC PRODUCTION
LINE OF THE FLAT BREAD

MOBILE FINE
SIEVING MACHINE

HEAVY DUTY MANHOLE COVERS

STATIONERY COARSE
SIEVING MACHINE

STIRRING & VENTILATION
MACHINE

FUEL Tank
(DIFFERENT CAPACITIES)

FUEL Tank

MILK COLLECTION CENTER

water tank

CARPENTRY PRODUCTS

METAL FURNITURE

ELECTRICAL BUS ( SETIBUS )

ELECTRICAL BUS BRAND : FOTON
MODEL : BJ6123 EVCA-A2

SMART GARAGE

CHARGER OF ELECTRICAL BUS
MODEL : L380KW750V15 F5PO2

MULTI PURPOSE TRANSPORT
LURE ll SHS
LOADS (20- 70 ) TON

MANUFACTURING & ASSEMPLY
OF MAZ TRUCKS
AND THEIR EQUIPMENTS

YOUTH PROJECT MODELS

METAL TRUSSES
Itis carried out according to the area
And the required sizes
According to the client's request

POP - UP CLASSROOM

OVERHEAD CONDUCTORS
FOR HIGH VOLTAGE

YOUTH PROJECT MODELS

PUMPS WITH DIFFERENT CAPACITIES AND HEIGHTS
DESIGNED TO BE USED WITH AN ELECTRIC MOTOR OR DIESEL ENGINE

SMART PREPAID METER
SINGLE PHASE VIS\VI102

SINGLE PHASE PREPAID
ENERGY METER VIPMI102-S

LOW VOLTAGE CABLE

SINGLE PHASE PREPAID
ENERGY METER VIPIVI102

ELECTRICAL DISTRIBUTION
BOXES & BOARDS

BOARDS OPERATE & CONTROL

FOOD CANS

INDUSTRIAL GASES

POTTERY KILN

AEROSOL CANS

FULL FIRE BOX

1 INCH

FOAM FIRE EXTINGUISHER
WITH OUTSIDE CARTRIDGE

CAPACITY 9- 25-50 - 100 - 150 LITER.

BOLLARD

FULL FIRE BOX
2 INCH

AUTOMATIC FIRE EXTINGUISHER
DEVICE 99 WITH CHEMICAL POWER
CAPACITY 6 - 12 KG.

FIRE EXTINGUISHER UNIT 99
WORKING WITH CARBON DIOXIDE GAS
CAPACITIES 2-3-6-10-20-30 KG

FIRE EXTINGUISHER DEVICE SELF ACTUATED
WITH FIRE SENSITIVE HOSE, WITH DRY
CHEMICAL POWDER CAPACITIES 6.9.12 KG

FIRE EXTINGUISHER WITH OUTSIDE CARTRIDGE
SIZE6 & 12 & 25 & 50 & 100 KG

fire extinguisher 99
WITH STOCK PRESSURE
SIZE 2,3, 6,9, 12 KG

FOAM FIRE EXTINGUISHER UNIT 99
WORKING WITH CARBON DIOXIDE GAS
(WITH FIRE SEARCH VALVE / HOSE )
CAPACITY 2- 6 - 10 KG

MECHANICAL WATER METER

Fire extinguisher
WITH INSIDE CARTRIDGE
SIZE1,2,6,12KG

SMART WATER SAVER

PREPAID WATER METER
TYPE MIPWM45

security surveillance cameras

Bicycle

Metal Detector

Garrett PD 6500I

X-Ray

LED Street 100w Day light

KATRON -275 POWER Classes

flood light

LED Street 150w Day light

TOWER LIGHTING UNITS

High bay light

Industrial protective helio mask

Unity Albany Seat

Shower Gel & hand soap

ELECTRICAL VENTILATORS

Detergent

Detergent

Ethyl

ALCOHOL & DISINFECTANTS

Ethyl Alcohol